Shelar Sanitation location
Risers and Lids for Septic Systems in Jackson MI
Stop the Dig! Get a Riser and Lid!

A riser and lid makes your life easier! Why keep paying for digging fees every 3 or 4 years, just install risers and lids and you never need to worry about digging up your tank lid again! You're done!

Risers and Lids for Septic Systems in Jackson MI
We Can Cut Risers to any Length!

Simply measure from your tank to the ground level and deduct 1 inch for the lid and your riser will be level with the surface. Yes, the mower will go right over it. If you prefer to not view the lid, then have us cut your riser 2" short of the surface. That way you can put an inch of dirt or crushed stone on top of it but still be close to the surface.

Risers and Lids for Septic Systems in Jackson MI
Installation is Easy!

You simply center the riser over your old cement lid if it is 24" or less in diameter. The inside dimension of the riser is 24 inches, and 27 inches wide. Four inch lag bolts are provided with your lid and they drill right into the 1/4 inch hard plastic black corrugated riser material. If the riser is over 8" in length, the dirt provides sufficient grip to keep it in place. If 8" or less we suggest pouring a bag of dry concrete around the outside which will harden on its own.

Risers and Lids for Septic Systems in Jackson MI
Pick them up at our Shop!

Visit our shop at 1478 Falahee Road, Jackson, MI 49203. Just bring your measurement and a form of payment and we will cut the riser to your desired length. Risers are affordable at $4.17 per inch or $50.00 per foot. The green lids have an o-ring the seals against the riser and acts as a vapor barrier.

Risers and Lids for Septic Systems in Jackson MI
Delivery Option:

If you prefer to let our crews do everything, we can install them for you. We do charge a separte delivery fee for such a service. So, why keep digging! Call Shelar Sanitation today and get a Riser and Lid: 517-764-1650